Helpful ReplyHot!Work standS?

Author
Bogiesan
Super Member
  • Total Posts : 92
  • Reward points: 0
  • Joined: 2016/09/30 19:20:00
  • Location: Boise, idaho
  • Status: offline
2017/04/15 19:16:51 (permalink)

Work standS?

I've been looking at the many DIY and PVC pipe stand plans for 'bents, trying to figure out how to grab the Giro26 while still allowing the wheels to spin. Looks like I need two clamps but where to put them so the chain is not rubbing in them but the bike is not going to flop?
I have one work stand and I can get another clamp.
#1
tojesky
Super Member
  • Total Posts : 623
  • Reward points: 0
  • Joined: 2011/04/22 22:21:44
  • Status: offline
Re: Work standS? 2017/04/16 11:21:59 (permalink) ☄ Helpfulby Bogiesan 2017/04/19 14:26:00
 http://ca2workcradle.blogspot.com/ 
 
For some  reason, you need to click the "HOME" in the webpage that opens to see the article.
post edited by tojesky - 2017/04/16 11:23:53

2013 CA2.0 - 700c
2014 ICE VTX+
2013 Invacare Force G hand cycle
2006 Corsa  (Sold July, 2013)
#2
Bogiesan
Super Member
  • Total Posts : 92
  • Reward points: 0
  • Joined: 2016/09/30 19:20:00
  • Location: Boise, idaho
  • Status: offline
Re: Work standS? 2017/04/19 14:26:35 (permalink)
Outstanding! Thanks I can build that.
#3
No_10
Junior Member
  • Total Posts : 39
  • Reward points: 0
  • Joined: 2011/08/02 10:42:20
  • Location: S. Miami, FL
  • Status: offline
Re: Work standS? 2019/10/30 09:37:55 (permalink)
Attached are pictures of my version of this stand with straps to prevent frame rotation.
#4
Mike Wilkerson
Administrator
  • Total Posts : 139
  • Reward points: 0
  • Joined: 2012/06/25 10:09:46
  • Status: offline
Re: Work standS? 2019/10/30 11:03:23 (permalink)
Looks like the pictures didn't attach. If you can send them to me I'll see if I can get them up: mike@bacchetta.com 
 
Mike Wilkerson
Bacchetta
#5
Jump to:
© 2019 APG vNext Commercial Version 5.1